How to unlock Huawei B618 router

[gadgetwarez]

Follow the steps below to unlock your Huawei B618

Requirements

• Windows PC
  
• USB and RJ45 cable
  
• Tweezer or a thin piece of wire
  
• Foreign network sim
  

How to unlock your Huawei B618

1. Install the drivers from the drivers' folder
   
2. Connect the router via USB to the computer.
   
3. Use a tweezer or thin piece of wire to connect BOOT and GND then connect the power supply and then you can remove the tweezer or wire
   
4. 1 port should appear in the Device Manager (see the 1port.png for reference)
   
5. From the load_*_to_B618 folder, run the cmd file and wait until complete
   
6. The bootloader will be loaded and 2 ports will appear
   
7. From the folder flash_via_*, run cmd file and wait until complete
   
8. Reboot the router (do not forget to connect the ethernet cable instead of USB)
   
9. If you wish to flash a different firmware version than what's provided in this package, then place the desired firmware in the same folder as and remove the *.BIN file from the folder